Created with Sketch. Created with Sketch.
SureShell® Hook & Loop Shotshell Carriers

SureShell® Hook & Loop Shotshell Carriers

Mar 8th 2018

SureShell Hook & Loop shotshell carriers are designed to allow the rapid attachment and removal of SureShell shell carrier yokes from the side of the shotgun receiver. The SureShell Hook & Loop shotshell carrier itself is laminated on one side with “male” or “hook” material that will stick temporarily to “female” or “loop” material on, for example, a tactical vest or affixed to the shotgun receiver. This loop material can either be glued to the shotgun or attached in the form of Hook & Loop SureShell Mounts for various shotgun platforms.

The package will include a sample of adhesive-backed 3M SJ3527N loop fastener material which can be cut to the shape of your shotgun receiver and permanently glued to the side of the shotgun. The front and back of this instruction sheet features shotgun receiver outlines that can be used as cutting templates for fitting the material to the supported shotguns. If your shotgun is not represented by the templates, it is still relatively easy for you to cut the loop fastener material freehand to fit your shotgun.

The templates assume you wish to secure the loop fastener material to the left side of your shotgun. If you have a left-handed shotgun and wish to reverse the template, you can do this either by tracing the template through to the opposite side of the paper, or by cutting the template carefully along its edge and turning it over.

To use the templates, first cut out the desired template outline, cutting well away from the edges of the template. Then using double-sided adhesive tape, tape the template to the adhesive backing paper side of the loop fastener material. Then use scissors or a hobby knife to cut the template and the loop fastener material around the edges of the template outline. Use a hobby knife to cut holes in the middle of the template, or join the holes with the edges with scissors.

Once the loop fastener material is cut to size, remove the adhesive backing paper and very carefully affix it to the shotgun receiver.

Mesa Tactical products are manufactured using the highest quality processes and materials, and should provide many years of reliable service.


SureShell polymer carrier yokes with hook & loop backing can be attached to shotgun receivers, tactical vests, etc.

92590 SureShell Polymer Carrier for Hook & Loop (6-Shell, 12-GA)

92600 SureShell Polymer Carrier for Hook & Loop (6-Shell, 12-GA, 3-Pack)

The following items include the shotgun mount for hook & loop only; SURESHELL YOKES SOLD SEPARATELY ABOVE.

92610 Hook & Loop SureShell Mount for Rem 870 (6-Shell, 12-GA)

92620 Hook & Loop SureShell Mount for Moss 500 (6-Shell, 12-GA)

94620 Hook & Loop SureShell Mount for Moss 930 (6-Shell, 12-GA)

94630 Hook & Loop SureShell Mount with Rail for Ben M2 Tactical (6-Shell, 12-GA, 4½ in)

94640 Hook & Loop SureShell Mount with Rail for Ben M4 (6-Shell, 12-GA, 5½ in)

94650 Hook & Loop SureShell Mount with Rail for Rem Versa Max (6-Shell, 12-GA, 7 in)

94660 Hook & Loop SureShell Mount with Rail for Moss 930 (6-Shell, 12-GA, 5 in)

94670 Hook & Loop SureShell Mount with Saddle Rail for Rem 870 (6-Shell, 12-GA, 5 in)

95460 Hook & Loop SureShell Mount with Rail for Ben SuperNova (6-Shell, 12-GA, 5½ in)