Clearance Sale: Full Length Picatinny Rails and Sling Attachments for Shotguns

mesa_tactical_full_length_rail_promo

Mesa Tactical is pleased to offer reduced clearance prices on special items like our 20/24″ inch Picatinny Rails and Sling Attachment for Shotguns. Save up to 50% on discontinued merchandise, but only while supplies last. While some are discontinued, all products are stylish and top quality. All sales final.

CLEARANCE ITEMS: (CLICK HERE)

OVERVIEW

Mesa Tactical has been an important pioneer in the development of Picatinny rails for many tactical shotgun applications. Full length rails can be used to provide more flexible mounting locations for zero magnification “red dot” optics, or to facilitate the use of night vision optics. The rails also allow the use of collinear back up iron sights (BUIS) commonly found on AR-15, M16 and M4 Carbines. The rails additionally support the installation of accessory rails on the barrel or magazine clamps on which to mount weapon lights or lasers. Owners of Remington, Mossberg, and other shotgun platforms could also utilize these same rails by having their local gunsmith drill and tap matching holes in the top of their own shotgun’s receiver.

All Mesa Tactical Picatinny rails are machined from 6061-T6 aircraft quality aluminum, and finished with Mil-spec Type III hard anodizing. Mesa Tactical Picatinny rails include all necessary mounting hardware. Full length rails are manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation.

PICATINNY (NATO STANAG 4694) RAILS                  FOR SHOTGUNS

RECEIVER MOUNT OPTICS RAILS

Mesa Tactical provides two methods for mounting Picatinny rails to tactical shotguns. For Remington shotguns, we offer the Mesa Tactical Saddle Rail, which mounts to both side of the receiver and wraps around the top. Top mount rails work with Remington and Mossberg shotguns that feature factory tapped rail mounting holes in the top of the receiver.

Mesa Tactical’s full length saddle mount Picatinny optic rails stretch from the rear of the shotgun receiver all the way beyond the barrel’s magazine ring. Machined from 6061-T6 aluminum and anodized with a tough mil-spec finish, saddle mount rails are attached, at the rear, on both sides of the shotgun receiver with a combination of Mesa Tactical’s unique stand-off and custom Chicago screws mounting methods. The front of the rails are secured to Mesa Tactical barrel clamps or magazine clamps. Rails are available with or without integrated aluminum SureShell® shotshell carrier designs that have increasingly become standard equipment on shotguns fielded by American law enforcement agencies.

  • Remington saddle rails attach to both sides of Remington 870, 1100 and 11-87 shotguns
  • 20 inch Remington rails with no clamps require magazine or barrel clamp to support front of rail.

Remington

90980 Saddle Rail for Remington w/ Barrel Clamp (12-GA, 20 in)

91680 Saddle Rail for Remington w/ Magazine Clamp (12-GA, 20 in)

90990 Saddle Rail for Remington (12-GA, 20 in, no clamp)

Mossberg

93540 Picatinny Rail for Moss 500/590 and Mav 88 w/ Pic Rail Clamp (12-GA, 20 in)

93550 Picatinny Rail for Moss 500/590 and Mav 88 w/ QD Swivel Clamp (12-GA, 20 in)

93450 Picatinny Rail for Moss 500/590 and Mav 88 (12-GA, 20 in, no clamp)

SURESHELL® SHOTSHELL CARRIERS

ALUMINUM SHELL CARRIERS WITH INTEGRATED PICATINNY RAIL

Mesa Tactical offers two methods for mounting SureShell shotshell carriers to Remington 870/1100/11-87  and Mossberg 500/590 shotguns. Our traditional side mount SureShell carriers attach via flat aluminum brackets to the sides of the shotgun receiver. We also offer unique saddle rail SureShell carriers that combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical sights.

Rails are available with or without integrated aluminum SureShell® shotshell holders, designs that have increasingly become standard equipment on shotguns fielded by American law enforcement agencies.

  • The following shell carriers include an integral top Picatinny optics rail.
  • SureShell carriers for the Remington 870 will also fit the Remington semi-automatics (except right-side carriers).
  • 20 inch Remington rails with no clamps require magazine or barrel clamp to support front of rail.
  • SureShell Aluminum Shotshell Carriers are rugged solutions for packing extra ammunition on the weapon.

Remington

91940 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Barrel Clamp (4-Shell, 12-GA, 20 in)

91950 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Barrel Clamp (6-Shell, 12-GA, 20 in)

91960 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Barrel Clamp (8-Shell, 12-GA, 20 in)

92120 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Mag Clamp (4-Shell, 12-GA, 20 in)

92140 SureShell Aluminum Carrier and Saddle Rail for Rem 870 w/ Mag Clamp (8-Shell, 12-GA, 20 in)

91970 SureShell Aluminum Carrier and Saddle Rail for Rem 870 (4-Shell, 12-GA, 20 in, no clamp)

91980 SureShell Aluminum Carrier and Saddle Rail for Rem 870 (6-Shell, 12-GA, 20 in, no clamp)  

91990 SureShell Aluminum Carrier and Saddle Rail for Rem 870 (8-Shell, 12-GA, 20 in, no clamp)

Mossberg

93560 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ Pic Rail Clamp (4-Shell, 12-GA, 20 in)

93570 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ Pic Rail Clamp (6-Shell, 12-GA, 20 in)

93580 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ Pic Rail Clamp (8-Shell, 12-GA, 20 in)

93590 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ QD Swivel Clamp (4-Shell, 12-GA, 20 in)

93600 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ QD Swivel Clamp (6-Shell, 12-GA, 20 in)

93610 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 w/ QD Swivel Clamp (8-Shell, 12-GA, 20 in)

93460 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 (4-Shell, 12-GA, 20 in, no clamp) 

93470 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 (6-Shell, 12-GA, 20 in, no clamp)

93480 SureShell Aluminum Carrier and Rail for Moss 500/590 and Mav 88 (8-Shell, 12-GA, 20 in, no clamp)

TELESCOPING STOCK AND ADAPTER KITS

HIGH-TUBE® TELESCOPING STOCK ADAPTERS AND CONVERSION KITS

The concept behind the telescoping stock system is simple: the shotgun stock is replaced by an adapter, which attaches to the rear end of the shotgun’s receiver and it, in turn, mimics the rear end of an AR-15 lower receiver, into which an AR-15 receiver extension tube can be threaded. The AR-15 telescoping stock and pistol grip can then be reliably attached. Our stock adapters, manufactured for the Remington 870 and Mossberg 500/590, are investment cast aircraft aluminum. They are then CNC machined and anodized with a Type III Class 2 Mil-spec finish.

Our High-tube adapters, which feature a much higher stock elevation (equivalent to an AR-15) and require an optics rail (included), are specialized adapters for unusual law enforcement applications or competition. Accessory mounting points on the sides of the High-tube aluminum adapters accept Picatinny rails or Mesa Tactical shell carriers, and are fitted with Timesert® steel thread inserts for strength and long life.

High-tube adapters and stock kits include a 9 inch or 24 inch top Picatinny optics rails. The 24 inch rails are anchored at the front by a clamp. The Remington versions are available with a barrel clamp or a magazine clamp, or no clamp at all (for customers who already have clamps); the Mossberg rails use a magazine clamp that features either a short length of Picatinny accessory rail at the bottom, or a sling swivel stud. No gunsmithing is required to install. Minor fitting of fasteners may be necessary.

  • High-tube kits require rail-mounted optics; all High-tube kits include a top Picatinny rail. They accept most AR-15 stocks or pistol grips.
  • Complete telescoping stock kits include stock adapter, Hogue pistol grip, M4 SOPMOD stock and push-button sling swivel.
  • Stock kits and adapters for the Mossberg 500 will also fit Mossberg 590 shotguns.
  • Buttstocks are the new pattern 6-position telescoping M4 SOPMOD polymer stocks.
  • 24 inch Remington rails with no clamps require magazine or barrel clamp to support front of rail.

Remington

91000 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 (12-GA, Barrel Clamp, 24 in rail)

91010 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 (12-GA, Magazine Clamp, 24 in rail)

90950 High-tube Telescoping Stock Adapter and Rail Kit for Rem 870 (24 in rail, no clamp)

92050 High-tube Telescoping Stock Kit for Rem 870 (Barrel Clamp, 24 in rail)

92060 High-tube Telescoping Stock Kit for Rem 870 (Magazine Clamp, 24 in rail)

94510 High-tube Telescoping Stock Kit for Rem 870 (24 in rail, no clamp)

92090 High-tube Telescoping Hydraulic Recoil Stock Kit for Rem 870 (Barrel Clamp, 24 in rail)

92100 High-tube Telescoping Hydraulic Recoil Stock Kit for Rem 870 (Magazine Clamp, 24 in rail)

94520 High-tube Telescoping Hydraulic Recoil Stock Kit for Rem 870 (24 in rail, no clamp)

Mossberg

91020 High-tube Telescoping Stock Adapter and Rail Kit for Moss 500/590 and Mav 88 (12-GA, Pic Rail Clamp, 24 in rail)

91030 High-tube Telescoping Stock Adapter and Rail Kit for Moss 500/590 and Mav 88 (12-GA, QD Swivel Clamp, 24 in rail)

92030 High-tube Telescoping Stock Kit for Moss 500/590 and Mav 88 (Pic Rail Clamp, 24 in rail)

92040 High-tube Telescoping Stock Kit for Moss 500/590 and Mav 88 (QD Swivel Clamp, 24 in rail)

92070 High-tube Telescoping Hydraulic Recoil Stock Kit for Moss 500/590 and Mav 88 (Pic Rail Clamp, 24 in rail)

92080 High-tube Telescoping Hydraulic Recoil Stock Kit for Moss 500/590 and Mav 88 (QD Swivel Clamp, 24 in rail)

ADAPTER MOUNT PICATINNY RAILS (FIT ON HIGH-TUBE ADAPTERS)

Adapter-mount rails are designed to be attached to the High-tube telescoping stock adapter mount points, requiring no alterations to the shotgun receiver.

Adapter-mount rails are designed to mount optics for use with High-tube telescoping stock adapters, or to mount accessories slightly away from the receiver when fastened to the telescoping stock adapter side accessory mount points. When used for optics, the elevation of the tall profile rails is similar to that of a flat top AR-15. The High-tube Adapters mimic the geometry of an AR-15 rifle, which means they can accept any buttstock or grip made for the AR-15. This also means the stock elevation is too high to use receiver- or barrel-mounted sighting systems. This is why High-tube adapter kits usually include a Picatinny scope rail, so that an optical sighting system can be mounted on the weapon.

Some kits for the Remington 870 do not include a clamp, as these are for customers who already have a Mesa Tactical barrel or magazine clamp installed on their shotgun.

  • The following rails feature an attachment point at one end (rear) of the rail.
  • 24 inch Remington rails with no clamps require magazine or barrel clamp to support front of rail.

Remington

90010 Adapter Mount Pic Rail w/ Barrel Clamp for Rem (12-GA, 24 in)

90020 Adapter Mount Pic Rail w/ Magazine Clamp for Rem (12-GA, 24 in)

90440 Adapter Mount Pic Rail for Remington (12-GA, 24 in, no clamp)

Mossberg

90460 Adapter Mount Pic Rail w/ Pic Rail Clamp for Moss 500/590 and Mav 88 (12-GA, 24 in)

90470 Adapter Mount Pic Rail w/ QD Swivel Clamp for Moss 500/590 and Mav 88 (12-GA, 24 in)

90480 Adapter Mount Pic Rail for Moss 500/590 and Mav 88 (12-GA, 24 in, no clamp)

sling_attachment_for_shotguns_sm_160229

SLING ATTACHMENTS FOR SHOTGUNS

RECEIVER MOUNT SLING ATTACHMENTS

The following sling and hook loop solutions mount directly to the shotgun receiver.

Remington

90330 Sling Loop for Remington

90930 Hook Loop for Remington

90940 Push-button Sling Swivel for Remington

Our all-steel receiver-back sling mounts fit between the shotgun receiver and the factory stock.

93320 Receiver-back Hook Loop for Remington

93330 Receiver-back Ambi Hook Loop for Remington

Mossberg

90260 Sling Loop for Moss 500/590 and Mav 88 (12-GA)

90270 Hook Loop for Moss 500/590 and Mav 88 (12-GA)

90430 Push-button Sling Swivel for Moss 500/590 and Mav 88 (12-GA)

Benelli

91420 Sling Loop for Ben M1014 (12-GA)

91430 Hook Loop for Ben M1014 12-GA)

91330 Push-button Sling Swivel for Ben M1014

MAGAZINE CAP SLING ATTACHMENTS

Magazine cap sling mounts replace the factory magazine caps on Remington shotguns.

91350 Sling Loop Magazine Cap for Remington

91360 Hook Loop Magazine Cap for Remington

92940 Ambi Hook Loop Magazine Cap for Remington

91340 Push-button Sling Swivel Magazine Cap for Remington

Restrictions:

  • Up to 50% Off applicable to select items only. 
  • Applies only to in-stock items. Does not apply to back-order & pre-order items.
  • Cannot be combined with other specials or promotions.
  • Certain items excluded.
  • While supplies last.
  • No code required.
  • FINAL SALE! Absolutely NO returns.

Previous post:

Next post: