Now Shipping: SureShell® Aluminum Carrier and Rail for Kel-Tec KSG


Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail for Kel-Tec KSG combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories.


The SureShell carrier yokes for the KSG shotgun are mounted on an extruded aluminum Picatinny rail that replaces the KSG’s factory optics rail.
Aluminum tabs on each side of the SureShell Carrier and Rail can accept lengths of Picatinny accessory rail (available separately) for the mounting of weapon lights and lasers.
SureShell shotshell carriers are assemblies comprising an aluminum yoke and backing plate and a Santoprene® elastomer tube. The yoke features four to eight vertical bores .700” or .810” in diameter to accept 20-gauge or 12-gauge shotgun shells. The shells are securely retained by the elastomer tube interfering with the bores.
The KSG’s factory rail is attached to two mount pillars, front and back, with an M4 metric bolt at each end. The SureShell Carrier and Rail for the Kel-Tec KSG mounting system is slightly different. Once the factory rail is removed, a steel recoil block is installed on each of the mount pillars. In addition to a hole for a replacement M2 bolt, each recoil block also features a threaded hole at a 45° angle that accepts a set screw that is tightened into the mounting pillar. The aluminum Sureshell and rail assembly is then fastened to the recoil blocks with four screws. This arrangement is designed to provide a robust and secure mounting method for the loaded SureShell carrier, even under heavy recoil.


Previous post:

Next post: