Cheek Riser for Urbino Stock (12-GA, Coyote)
Mesa Tactical's field-adjustable cheek riser for Urbino Stock (12-GA, Coyote) was developed to provide superior cheek weld when using optics. The cheekpiece snaps onto rails molded into the sides of specially equipped Urbino stock armatures. In the event of optics failure, the cheek riser can be quickly removed or readjusted to a lower level.
You save $21.00 (70%)!
The Urbino Tactical stock cheek riser concept is simple. The cheek riser rides on a pair of rails molded into the sides of the stock armature, and is secured in place by the snap-in buttpad. There are five pairs of slots on the inside of the cheek riser offering a range of 1¼ inches of vertical adjustment in five elevations, in addition to using the stock with no cheek riser at all.
Because the cheek riser requires support rails on the side of the stock armature, cheek risers cannot be installed on Urbino Tactical stocks that do not have these rails. So while an Urbino Tactical stock with cheek riser rails can be used without the cheek riser, the opposite is not true: standard Urbino Tactical stocks cannot accept cheek risers. The decision whether to use a cheek riser must be made upon initial purchase of the Urbino Tactical stock.
Mesa Tactical’s specially-developed SureShell® shotshell carriers secure right on to the cheekpieces themselves. As with our other Mesa Tactical SureShell products, these shell carriers feature all aluminum construction. While rail-equipped Urbino stocks can be used without the cheekpiece, cheek risers cannot be fitted to stocks that do not have the rails.
The Limbsaver buttpads are available for the Urbino Tactical Stocks in the following 12 gauge shotgun platforms:
- Remington 870, Remington 1100, Remington 11-87 and VersaMax
- Benelli M1 (most models), Benelli M2, Benelli M3, Benelli M4 and SuperNova
- Mossberg 930
- SureShell® ShotShell Carriers can be attached to the cheek riser.
Cheek risers can only be fitted to Urbino Tactical stocks with molded riser support rails. Installing colored cheek risers are an inexpensive and easy way to dress up your shotgun.
All Mesa Tactical products are made in the USA of high quality materials and include LIFETIME WARRANTY. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor. In no event will Mesa Tactical be liable for damages, lost revenue, lost wages, lost savings or any other incidental or consequential damages arising from purchase, use or inability to use this product. No express or implied warranty is madefor Mesa Tactical product damaged by accidents, misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification. Mesa Tactical’s warranty covers only repair or replacement of defective Mesa Tactical products.
*No export license is required for most international destinations.
You Might Also Like:
- Adapter Saddle Mount Pic Rail Rail for Moss 500 (12-GA, 24 in, no clamp)
- Adapter Saddle Mount Pic Rail Rail for Remington (12-GA, 24 in, no clamp)
- Adapter Saddle Mount Pic Rail Rail w/ Barrel Clamp for Rem (12-GA, 24 in)
- Adapter Saddle Mount Pic Rail Rail w/ Magazine Clamp for Rem (12-GA, 24 in)
- Adapter Saddle Mount Pic Rail Rail w/ Pic Rail Clamp for Moss 500 (12-GA, 24 in)