Stock Mount SureShell Carrier for Ben Tac Stocks (except Ben M4) (4-Shell, 12-GA)
These Aluminum 4- shell SureShell carriers attach to the Benelli pistol grip fixed stocks (does not fit Benelli M4 stocks or Urbino Tactical stocks)
Our Stock Mount SureShell carriers fit on most Benelli pistol grip fixed stocks. The rugged stamped steel SureShell bracket replaces the stock’s sling loop and mounts four additional shells securely on the side of the stock (does not fit on Benelli M4 stocks, nor will this shell carrier fit on the Urbino Tactical stock). This assembly is also available with an H&K style (dog leash) hook loop opposite the shell carrier instead of the webbing loop.
SureShell carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard coat anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish.
Aluminum SureShell Carriers
SureShell shotshell carriers are assemblies comprising an aluminum yoke and backing plate and a Santoprene® elastomer tube. The yoke features four to eight vertical bores .700” or .810” in diameter to accept 12-gauge shotgun shells. The shells are securely retained by the elastomer tube interfering with the bores. In many cases, shells can be confidently retained in a brass down as well as a brass up configuration, though brass up is most secure.
The elastomer used to interfere with the shell bores and thus retain the shells in the SureShell shotshell carrier is made of tough Santoprene thermoplastic. We are required to publish the following message to comply with California’s Proposition 65:
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
SureShell carriers are assembled at the factory with a black Santoprene elastomer tibe with a shore value, or stiffness, of A64. This has proven to be optimal for most customers and in most situations. However, some customers require a stiffer elastomer and for those operators we have included an alternative white elastomer tube with a shore value of A73. The black elastomer tube can be swapped for the white one if tighter shell retention is required.
OTHER TYPES OF SURESHELL CARRIERS
The Adapter Mount SureShell shotshell carrier is designed to be used with shotguns already equipped with the Mesa Tactical High-tube or LEO Telescoping Stock Adapter. If you do not already have a Mesa Tactical Telescoping Stock Adapter system installed on your shotgun, this carrier cannot be used. The other Mesa Tactical SureShell carriers described in this guide can be fitted to shotgun receivers without the stock adapter installed.
Machined from 6061-T6 hard anodized aircraft aluminum, the shell holders incorporate an entirely new internal elastomer shell retention system that eliminates the need for the flexible plastic shell retainers used on conventional shell holders. A unique arrangement of threaded fasteners secures the shell holder to the shotgun receiver without the risk of stripping threads in the aluminum bracket. The Shell Holders will be available in four-shell, six-shell and eight-shell versions. Four shell versions will be available for mounting on the right side of the shotgun receiver, while all versions will fit on the left side. SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.
Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694)
Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver.
These SureShell shell carrier attaches to the Benelli pistol grip fixed stock (does not fit Benelli M4 stock or Urbino Tactical stock):
- 91830 Stock Mount SureShell Carrier for Ben Tac Stocks (except Ben M4) (Hook Loop, 4-Shell, 12-GA)
- 91840 Stock Mount SureShell Carrier for Ben Tac Stocks (except Ben M4) (4-Shell, 12-GA)
SURESHELL CARRIER FOR M4 SOPMOD STOCK
The Stock Mount four-shell SureShell Carrier for Benelli is designed to replace the rear sling loop in Benelli fixed pistol grip stocks used on most models (except the Benelli M4; the sling loop on the Benelli M4 is glued into place and cannot be easily removed. The Stock Mount four-shell SureShell Carrier for Benelli cannot be installed on the Urbino Tactical stock either).
To install the shell carrier, first remove the stock’s buttpad to gain access to the stock mounting bolt. Remove the mounting bolt to allow the sling loop plate to slide free of the stock. Insert the SureShell assembly where the sling loop plate used to be, with the carrier pointing forward. Re-install the stock bolt and tighten to secure the stock and the SureShell carrier.
For easiest access with your support arm, the shells should be inserted in the carrier brass down.
All Mesa Tactical products are made in the USA of high quality materials and include LIFETIME WARRANTY. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor. In no event will Mesa Tactical be liable for damages, lost revenue, lost wages, lost savings or any other incidental or consequential damages arising from purchase, use or inability to use this product. No express or implied warranty is madefor Mesa Tactical product damaged by accidents, misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification. Mesa Tactical’s warranty covers only repair or replacement of defective Mesa Tactical products.
*No export license is required for most international destinations.
You Might Also Like:
- Stock Mount SureShell® Carrier for Ben Tac Stocks (except Ben M4) (Hook Loop, 4-Shell, 12-GA)
- SureShell Carrier for M4 SOPMOD Stock (4-Shell, 12-GA) (Right Side)
- SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Left Side)
- SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Right Side)
- SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Right Side)