SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Right Side)
Urbino Tactical stocks with cheek risers can accept SureShell carriers secured right on to the cheekpieces themselves. As with our other SureShell products, these shell carriers feature all aluminum construction.
The rugged Urbino Tactical stock features a “tactical” 12½ inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.
Urbino Tactical stocks with cheek risers can accept SureShell carriers secured right on to the cheekpieces themselves. As with our other SureShell products, these shell carriers feature all aluminum construction. The field-adjustable cheek riser was developed to provide superior cheek weld when using optics. The cheekpiece snaps onto rails molded into the sides of specially equipped Urbino stock armatures. In the event of optics failure, the cheek riser can be quickly removed or readjusted to a lower level.
SureShell carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard coat anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish.
Aluminum SureShell Carriers
SureShell shotshell carriers are assemblies comprising an aluminum yoke and backing plate and a Santoprene® elastomer tube. The yoke features four to eight vertical bores .700” or .810” in diameter to accept 12-gauge shotgun shells. The shells are securely retained by the elastomer tube interfering with the bores. In many cases, shells can be confidently retained in a brass down as well as a brass up configuration, though brass up is most secure.
The elastomer used to interfere with the shell bores and thus retain the shells in the SureShell shotshell carrier is made of tough Santoprene thermoplastic. We are required to publish the following message to comply with California’s Proposition 65:
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
SureShell carriers are assembled at the factory with a black Santoprene elastomer tibe with a shore value, or stiffness, of A64. This has proven to be optimal for most customers and in most situations. However, some customers require a stiffer elastomer and for those operators we have included an alternative white elastomer tube with a shore value of A73. The black elastomer tube can be swapped for the white one if tighter shell retention is required.
OTHER TYPES OF SURESHELL CARRIERS
The Adapter Mount SureShell shotshell carrier is designed to be used with shotguns already equipped with the Mesa Tactical High-tube or LEO Telescoping Stock Adapter. If you do not already have a Mesa Tactical Telescoping Stock Adapter system installed on your shotgun, this carrier cannot be used. The other Mesa Tactical SureShell carriers described in this guide can be fitted to shotgun receivers without the stock adapter installed.
Machined from 6061-T6 hard anodized aircraft aluminum, the shell holders incorporate an entirely new internal elastomer shell retention system that eliminates the need for the flexible plastic shell retainers used on conventional shell holders. A unique arrangement of threaded fasteners secures the shell holder to the shotgun receiver without the risk of stripping threads in the aluminum bracket. The Shell Holders will be available in four-shell, six-shell and eight-shell versions. Four shell versions will be available for mounting on the right side of the shotgun receiver, while all versions will fit on the left side. SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.
Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694)
Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver.
These shell carriers mount to the cheek riser of the Urbino Tactical stock:
- 90140 SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Right Side)
- 90150 SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Right Side)
- 90160 SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Left Side)
- 90170 SureShell Carrier for Urbino Riser (6-Shell, 12-GA) (Left Side)
SURESHELL CARRIER FOR URBINO STOCK
Mesa Tactical Urbino Tactical stocks fitted with a cheek riser can accept specialized four-shot or six-shot SureShell shotshell carriers. The two holes on each side of the cheek riser correspond with the holes in the mounting brackets of the SureShell carriers. Simply screw the flathead cap screws into the hex nuts retained in the inside pockets. Test the fit of the cheek riser to ensure the mounting screws do not interfere with the stock. If they do, remove them and grind them down a little until there is no interference.
For easiest access with your support arm, the shells should be inserted in the carrier brass down.
All Mesa Tactical products are made in the USA of high quality materials and include LIFETIME WARRANTY. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor. In no event will Mesa Tactical be liable for damages, lost revenue, lost wages, lost savings or any other incidental or consequential damages arising from purchase, use or inability to use this product. No express or implied warranty is madefor Mesa Tactical product damaged by accidents, misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification. Mesa Tactical’s warranty covers only repair or replacement of defective Mesa Tactical products.
*No export license is required for most international destinations.
You Might Also Like:
- Stock Mount SureShell Carrier for Ben Tac Stocks (except Ben M4) (4-Shell, 12-GA)
- Stock Mount SureShell® Carrier for Ben Tac Stocks (except Ben M4) (Hook Loop, 4-Shell, 12-GA)
- SureShell Carrier for M4 SOPMOD Stock (4-Shell, 12-GA) (Right Side)
- SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Left Side)
- SureShell Carrier for Urbino Riser (4-Shell, 12-GA) (Right Side)