SureShell Aluminum Carrier/Rail For Kel-Tec KSG Shotgun

The SureShell carrier system for the Kel-Tec KSG comprises a replacement anodized aluminum Picatinny optics rail which supports one or two machined shell carrier yokes. Small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (rail not included). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun. SureShell carriers for the Kel-Tec KSG feature four- or six-shell yokes, on the left side or right side or both sides. A replacement Picatinny rail without SureShell yokes is also available.

SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four and six shell configurations and multiple rail lengths available. This arrangement is designed to provide a robust and secure mounting method for the loaded SureShell carrier, even under heavy recoil.

Aluminum tabs on each side of the SureShell Carrier and Rail for the Kel-Tec KSG can accept lengths of Picatinny accessory rail (available separately) for the mounting of weapon lights and lasers. The KSG’s factory rail is attached to two mount pillars, front and back, with an M4 metric bolt at each end. The SureShell Carrier and Rail for the Kel-Tec KSG mounting system is slightly different. Once the factory rail is removed, a steel recoil block is installed
on each of the mount pillars. In addition to a hole for a replacement M2 bolt, each recoil block also features a threaded hole at a 45° angle that accepts a set screw that is tightened into the mounting pillar. The aluminum Sureshell and rail assembly is then fastened to the recoil blocks with four screws.

SHELL CARRIERS WITH INTEGRATED PICATINNY RAIL FOR KEL-TEC KSG

92950 SureShell Aluminum Carrier and Rail for Kel-Tec KSG (4-Shell, 12-GA, Left Side)

92980 SureShell Aluminum Carrier and Rail for Kel-Tec KSG (6-Shell, 12-GA, Left Side)

92990 SureShell Aluminum Carrier and Rail for Kel-Tec KSG (6-Shell, 12-GA, Right Side)

94500 Picatinny Rail for Kel-Tec KSG (12-GA, 13 in, 18 in Barrel)

ADAPTER AND CLAMP MOUNT ACCESSORY RAILS

Attach to stock adapter mount points, as well as to barrel and magazine clamps or our shell carriers or rails for the Kel-Tec KSG shotgun.

90690 Adapter Mount Standard Profile Picatinny Rail, 2 in

91130 Adapter Mount Standard Profile Picatinny Rail, 3½ in

WARRANTY All Mesa Tactical products are made in the USA of high quality materials and include LIFETIME WARRANTY. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor. In no event will Mesa Tactical be liable for damages, lost revenue, lost wages, lost savings or any other incidental or consequential damages arising from purchase, use or inability to use this product. No express or implied warranty is madefor Mesa Tactical product damaged by accidents, misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification. Mesa Tactical’s warranty covers only repair or replacement of defective Mesa Tactical products. *No export license is required for most international destinations.